# tikv-ctl

## Learn about interacting with tikv-ctl

We are currently refactoring our documentation. Please excuse any problems you may find and report them here.

TiKV Control (tikv-ctl) is a command line tool of TiKV, used to manage the cluster.

When you compile TiKV, the tikv-ctl command is also compiled at the same time. If the cluster is deployed using Ansible, the tikv-ctl binary file exists in the corresponding tidb-ansible/resources/bin directory. If the cluster is deployed using the binary, the tikv-ctl file is in the bin directory together with other files such as tidb-server, pd-server, tikv-server, etc.

## General options

tikv-ctl provides two operation modes:

• Remote mode: use the --host option to accept the service address of TiKV as the argument

For this mode, if SSL is enabled in TiKV, tikv-ctl also needs to specify the related certificate file. For example:

$tikv-ctl --ca-path ca.pem --cert-path client.pem --key-path client-key.pem --host 127.0.0.1:21060 <subcommands>  However, sometimes tikv-ctl communicates with PD instead of TiKV. In this case, you need to use the --pd option instead of --host. Here is an example: $ tikv-ctl --pd 127.0.0.1:2379 compact-cluster
store:"127.0.0.1:20160" compact db:KV cf:default range:([], []) success!

• Local mode: Use the --db option to specify the local TiKV data directory path. In this mode, you need to stop the running TiKV instance.

Unless otherwise noted, all commands support both the remote mode and the local mode.

Additionally, tikv-ctl has two simple commands --to-hex and --to-escaped, which are used to make simple changes to the form of the key.

Generally, use the escaped form of the key. For example:

$tikv-ctl --to-escaped 0xaaff \252\377$ tikv-ctl --to-hex "\252\377"
AAFF


Note: When you specify the escaped form of the key in a command line, it is required to enclose it in double quotes. Otherwise, bash eats the backslash and a wrong result is returned.

## Subcommands, some options and flags

This section describes the subcommands that tikv-ctl supports in detail. Some subcommands support a lot of options. For all details, run tikv-ctl --help <subcommand>.

### View information of the Raft state machine

Use the raft subcommand to view the status of the Raft state machine at a specific moment. The status information includes two parts: three structs (RegionLocalState, RaftLocalState, and RegionApplyState) and the corresponding Entries of a certain piece of log.

Use the region and log subcommands to obtain the above information respectively. The two subcommands both support the remote mode and the local mode at the same time. Their usage and output are as follows:

$tikv-ctl --host 127.0.0.1:21060 raft region -r 2 region id: 2 region state key: \001\003\000\000\000\000\000\000\000\002\001 region state: Some(region {id: 2 region_epoch {conf_ver: 3 version: 1} peers {id: 3 store_id: 1} peers {id: 5 store_id: 4} peers {id: 7 store_id: 6}}) raft state key: \001\002\000\000\000\000\000\000\000\002\002 raft state: Some(hard_state {term: 307 vote: 5 commit: 314617} last_index: 314617) apply state key: \001\002\000\000\000\000\000\000\000\002\003 apply state: Some(applied_index: 314617 truncated_state {index: 313474 term: 151})  ### View the Region size Use the size command to view the Region size: $ tikv-ctl --db /path/to/tikv/db size -r 2
region id: 2
cf default region size: 799.703 MB
cf write region size: 41.250 MB
cf lock region size: 27616


### Scan to view MVCC of a specific range

The --from and --to options of the scan command accept two escaped forms of raw key, and use the --show-cf flag to specify the column families that you need to view.

$tikv-ctl --db /path/to/tikv/db scan --from 'zm' --limit 2 --show-cf lock,default,write key: zmBootstr\377a\377pKey\000\000\377\000\000\373\000\000\000\000\000\377\000\000s\000\000\000\000\000\372 write cf value: start_ts: 399650102814441473 commit_ts: 399650102814441475 short_value: "20" key: zmDB:29\000\000\377\000\374\000\000\000\000\000\000\377\000H\000\000\000\000\000\000\371 write cf value: start_ts: 399650105239273474 commit_ts: 399650105239273475 short_value: "\000\000\000\000\000\000\000\002" write cf value: start_ts: 399650105199951882 commit_ts: 399650105213059076 short_value: "\000\000\000\000\000\000\000\001"  ### View MVCC of a given key Similar to the scan command, the mvcc command can be used to view MVCC of a given key. $ tikv-ctl --db /path/to/tikv/db mvcc -k "zmDB:29\000\000\377\000\374\000\000\000\000\000\000\377\000H\000\000\000\000\000\000\371" --show-cf=lock,write,default
key: zmDB:29\000\000\377\000\374\000\000\000\000\000\000\377\000H\000\000\000\000\000\000\371
write cf value: start_ts: 399650105239273474 commit_ts: 399650105239273475 short_value: "\000\000\000\000\000\000\000\002"
write cf value: start_ts: 399650105199951882 commit_ts: 399650105213059076 short_value: "\000\000\000\000\000\000\000\001"


In this command, the key is also the escaped form of raw key.

### Scan raw keys

The raw-scan command scans directly from the RocksDB. Note that to scan data keys you need to add a 'z' prefix to keys.

Use --from and --to options to specify the range to scan (unbounded by default). Use --limit to limit at most how many keys to print out (30 by default). Use --cf to specify which cf to scan (can be default, write or lock).

$./tikv-ctl --db /var/lib/tikv/db/ raw-scan --from 'zt' --limit 2 --cf default key: "zt\200\000\000\000\000\000\000\377\005_r\200\000\000\000\000\377\000\000\001\000\000\000\000\000\372\372b2,^\033\377\364", value: "\010\002\002\002%\010\004\002\010root\010\006\002\000\010\010\t\002\010\n\t\002\010\014\t\002\010\016\t\002\010\020\t\002\010\022\t\002\010\024\t\002\010\026\t\002\010\030\t\002\010\032\t\002\010\034\t\002\010\036\t\002\010 \t\002\010\\"\t\002\010$\t\002\010&\t\002\010(\t\002\010*\t\002\010,\t\002\010.\t\002\0100\t\002\0102\t\002\0104\t\002"
key: "zt\200\000\000\000\000\000\000\377\025_r\200\000\000\000\000\377\000\000\023\000\000\000\000\000\372\372b2,^\033\377\364", value: "\010\002\002&slow_query_log_file\010\004\002P/usr/local/mysql/data/localhost-slow.log"

Total scanned keys: 2


To print the value of a key, use the print command.

In order to record Region state details, TiKV writes some statistics into the SST files of Regions. To view these properties, run tikv-ctl with the region-properties sub-command:

$tikv-ctl --host localhost:20160 region-properties -r 2 num_files: 0 num_entries: 0 num_deletes: 0 mvcc.min_ts: 18446744073709551615 mvcc.max_ts: 0 mvcc.num_rows: 0 mvcc.num_puts: 0 mvcc.num_versions: 0 mvcc.max_row_versions: 0 middle_key_by_approximate_size:  The properties can be used to check whether the Region is healthy or not. If not, you can use them to fix the Region. For example, splitting the Region manually by middle_key_approximate_size. ### Compact data of each TiKV manually Use the compact command to manually compact data of each TiKV. If you specify the --from and --to options, then their flags are also in the form of escaped raw key. You can use the --db option to specify the RocksDB that you need to compact. The optional values are kv and raft. Also, the --threads option allows you to specify the concurrency that you compact and its default value is 8. Generally, a higher concurrency comes with a faster compact speed, which might yet affect the service. You need to choose an appropriate concurrency based on the scenario. $ tikv-ctl --db /path/to/tikv/db compact -d kv
success!


### Compact data of the whole TiKV cluster manually

Use the compact-cluster command to manually compact data of the whole TiKV cluster. The flags of this command have the same meanings and usage as those of the compact command.

### Set a Region to tombstone

The tombstone command is usually used in circumstances where the sync-log is not enabled, and some data written in the Raft state machine is lost caused by power down.

In a TiKV instance, you can use this command to set the status of some Regions to Tombstone. Then when you restart the instance, those Regions are skipped. Those Regions need to have enough healthy replicas in other TiKV instances to be able to continue writing and reading through the Raft mechanism.

pd-ctl>> operator add remove-peer <region_id> <peer_id>
success!
$tikv-ctl --host 127.0.0.1:21061 consistency-check -r 2 DebugClient::check_region_consistency: RpcFailure(RpcStatus { status: Unknown, details: Some("StringError(\"Leader is on store 1\")") })  Note: • This command only supports the remote mode. • Even if this command returns success!, you need to check whether TiKV panics. This is because this command is only a proposal that requests a consistency check for the leader, and you cannot know from the client whether the whole check process is successful or not. ### Dump snapshot meta This sub-command is used to parse a snapshot meta file at given path and print the result. To avoid checking the Regions while TiKV is started, you can use the tombstone command to set the Regions where the Raft state machine reports an error to Tombstone. Before running this command, use the bad-regions command to find out the Regions with errors, so as to combine multiple tools for automated processing. $ tikv-ctl --db /path/to/tikv/db bad-regions
all regions are healthy


If the command is successfully executed, it prints the above information. If the command fails, it prints the list of bad Regions. Currently, the errors that can be detected include the mismatches between last index, commit index and apply index, and the loss of Raft log. Other conditions like the damage of snapshot files still need further support.

### View Region properties

• To view in local the properties of Region 2 on the TiKV instance that is deployed in /path/to/tikv:

$tikv-ctl --db /path/to/tikv/data/db region-properties -r 2  • To view online the properties of Region 2 on the TiKV instance that is running on 127.0.0.1:20160: $ tikv-ctl --host 127.0.0.1:20160 region-properties -r 2


### Modify the RocksDB configuration of TiKV dynamically

You can use the modify-tikv-config command to dynamically modify the configuration arguments. Currently, it only supports dynamically modifying RocksDB related arguments.

• -m is used to specify the target RocksDB. You can set it to kvdb or raftdb.
• -n is used to specify the configuration name. You can refer to the arguments of [rocksdb] and [raftdb] (corresponding to kvdb and raftdb) in the TiKV configuration template. You can use default|write|lock + . + argument name to specify the configuration of different CFs. For kvdb, you can set it to default, write, or lock; for raftdb, you can only set it to default.
• -v is used to specify the configuration value.
$tikv-ctl modify-tikv-config -m kvdb -n max_background_jobs -v 8 success！$ tikv-ctl modify-tikv-config -m kvdb -n write.block-cache-size -v 256MB
success!
$tikv-ctl modify-tikv-config -m raftdb -n default.disable_auto_compactions -v true success!  ### Force Region to recover the service from failure of multiple replicas Use the unsafe-recover remove-fail-stores command to remove the failed machines from the peer list of Regions. Then after you restart TiKV, these Regions can continue to provide services using the other healthy replicas. This command is usually used in circumstances where multiple TiKV stores are damaged or deleted. The -s option accepts multiple store_id separated by comma and uses the -r flag to specify involved Regions. Otherwise, all Regions’ peers located on these stores will be removed by default. $ tikv-ctl --db /path/to/tikv/db unsafe-recover remove-fail-stores -s 3 -r 1001,1002
success!


Note:

• This command only supports the local mode. It prints success! when successfully run.
• You must run this command for all stores where specified Regions’ peers are located. If -r is not set, all Regions are involved, and you need to run this command for all stores.

### Recover from MVCC data corruption

Use the recover-mvcc command in circumstances where TiKV cannot run normally caused by MVCC data corruption. It cross-checks 3 CFs (“default”, “write”, “lock”) to recover from various kinds of inconsistency.

Use the -r option to specify involved Regions by region_id. Use the -p option to specify PD endpoints.

$tikv-ctl --db /path/to/tikv/db recover-mvcc -r 1001,1002 -p 127.0.0.1:2379 success!  Note: • This command only supports the local mode. It prints success! when successfully run. • The argument of the -p option specifies the PD endpoints without the http prefix. Specifying the PD endpoints is to query whether the specified region_id is validated or not. • You need to run this command for all stores where specified Regions’ peers are located. ### Ldb Command The ldb command line tool offers multiple data access and database administration commands. Some examples are listed below. For more information, refer to the help message displayed when running tikv-ctl ldb or check the documents from RocksDB. Examples of data access sequence: To dump an existing RocksDB in HEX: $ tikv-ctl ldb --hex --db=/tmp/db dump


To dump the manifest of an existing RocksDB:

\$ tikv-ctl ldb --hex manifest_dump --path=/tmp/db/MANIFEST-000001


You can specify the column family that your query is against using the --column_family=<string> command line.

--try_load_options loads the database options file to open the database. It is recommended to always keep this option on when the database is running. If you open the database with default options, the LSM-tree might be messed up, which cannot be recovered automatically.